PC-Deccodull® VS
Synthetic glossy Venetian Stucco plaster for indoor and outdoor use
PC-Deccodull® VS is a masonry covering for interiors and outdoor, which enables a decorative finish to be obtained – the only one of its kind – resembling the stuccoes to be found in the ancient buildings in Venice. Even though the means of application are in frequent use, the product appears different each time it is applied, characterized by tones and effects that depend on the skill of the decorator. PC-Deccodull® VS can be applied on particular architectural elements, such as cornices and columns, as well as on flat surfaces.
INSTRUCTIONS FOR USE
May be applied on:
- New and old plasters based on hydraulic binders.
- Concrete surfaces.
- Gypsum and gypsum board surfaces.
- Old paints and wall coatings that are organic or mineral in nature.
- Dry, compact, absorbent and cohesive.
- Mineral conglomerates of various kinds, as long as they are absorbent.
- Composite wood surfaces.
- Surfaces should be adequately prepared by following the instructions given in the paragraph ‘PREPARING THE SURFACE’.
- Do not apply on freshly painted surfaces.
PREPARING THE SURFACE
Plaster, gypsum and gypsum board surfaces:
Make sure that the surface is thoroughly dried and aged. Resurface or consolidate using specific products if necessary.
Brush or wash to remove any efflorescence and any old peeling paint. Eliminate any raised layers of lime-based or tempera paints.
Remove any dust, smog or other deposits by brushing.
Level any irregularities in the surface and treat holes, cracks, crevices and gaps with PC-Conrend® Crack. Use adequate sealants to seal any cracks.
Sand putty and touch-ups with sandpaper, remove dust.
Smooth the surface properly.
DOWNLOADS
Technical Datasheet
PC-Deccodull® VS
