FEATURES

• PC-Tilefix® Grout is the recommended choice for tile joints ranging from 1-6mm in width.
• Allow a 24-hour interval for grouting after the tiles have been fixed.
• Maintain the grouted area free of dust particles for at least 24 hours.
• Optimal results are achieved by employing spacers and maintaining a minimum 2mm joint between tiles.
• In the case of highly porous tiles, conducting a sample test to detect potential staining is advisable. To prevent this issue, mask the tiles before grouting.

APPLICATION

• Gradually combine approximately 2.5 parts of powder with 1 part of clean water (measured by volume) until a smooth, firm paste is achieved.
• Avoid prolonging the pot life by adding extra water to the mixture.
• Utilize a slow-speed mixer during the mixing process.
• Thoroughly fill the tile joints with weber. color fine in a diagonal pattern across the tile surfaces, employing a rubber grouting trowel or suitable tool.
• Allow PC-Tilefix® Grout dewdrop to begin setting (within 30 to 45 minutes).
• Remove excess grout using a sponge after 45 to 60 minutes.
• Following approximately 3 hours of drying time, clean the tiles with a dry cloth.