PC-Sealcoat® Penetration

Penetrating Waterproofing compound for positive & negative water presser

PC-Sealcoat® Penetration

PC-sealcoat® Penetration is a very highly built integral waterproofing compound that Waterproofs and protects concrete in-depth permanently. It consists of specialty chemical compositions of active chemicals, which build a strong barrier against waterpenetrating concrete surfaces. needs only to be mixed with water before application. When applied to a concrete surface, the active chemicals react with moisture and the by-products of cement hydration to cause a catalytic reaction that generates an insoluble, crystalline structure.

These crystals penetration depth in concrete up to 1000 mm , fills the pores, and minor shrinkage cracks up to 500 microns in the concrete to prevent further water ingress under pressure. It’s effective for positive and negative water pressure. In addition to waterproofing the structure, it protects concrete against seawater, wastewater, aggressive ground water, and many other chemical solutions. PC-Sealcoat® Penetration is approved for use in contact with potable water and is therefore suitable for use in water storage tanks, reservoirs, water treatment plants, etc.

APPLICATION AREA

  • For waterproofing structures and objects that are in contact with water. For indoor and outdoor use. It is used for waterproofing: the external and internal walls of
  • Basement retaining walls
  • Parking structures
  • Concrete slabs (floor/roof/balcony, etc.)
  • Tunnels and subway systems
  • Construction joints
  • Foundations
  • Water retaining structures
  • Underground vaults
  • Swimming pools
  • Sewage and water treatment plants
  • Channels
  • Reservoirs
  • Bridges, dams and roads.

ADVANTAGE

  • Imparts permeability to water and dampness to coated surfaces Gives surfaces that are efflorescence-free, moss-resistant and resistant to fungus growth.
  • Maintains the breathing properties of concrete, Penetrate 1000 MM depth in concrete seal permanently.
  • Due to excellent adhesion and thixotropic properties, vertical and inclined surfaces can be easy applied.
  • Possesses high flexural and tensile strengths and provides for thermal movements.
  • Is free of chlorides, water-soluble halogens and corrosive substances.
  • System protects cementitious substrates against freeze-thaw cycles.
  • Seals hairline and shrinkage cracks up top 500 microns.
  • Can be applied from either the positive or negative side.
  • Protects embedded steel

DOWNLOADS

Technical Datasheet

PC-Sealcoat® penetration